If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by italcarrier on August 16, 2007, 1:55 pm
Hello groupies!
I'm ItalCarrier (a nickname) and I'm from Mexico City, I'm a novel
digitizer and embroiderer. I use Amaya XT modules for embroidery (with
licensed Amaya SE Operative System) and Wilcom 9 for digitize (the
same, licensed, high cost BTW).
I'm having problems with a digitizing. It's a rectangle (tatami fill,
0=BA, first underlay tatami 45=BA, second underlay tatami 135=BA) using
simple stabilizer (peyon brand, the most extended in Mexico). I tried
to hoop with and without stabilizer, same results.
The embroidery comes with letters on the rectangle (satin fill, 80%
density, no underlays), and the rectangle becomes pulled from the
right-bottom corner. All the rest of design is OK when embroidered.
And, the fabric is piqu=E8 (open weave), so I'm using 5 layers of
stabilizer to get the best results.
I hope you can help me.
ItalCarrier
|
|
Posted by lé.ÞeemÞ on August 17, 2007, 2:55 am
show/hide quoted text
>Hello groupies!
>I'm ItalCarrier (a nickname) and I'm from Mexico City, I'm a novel
>digitizer and embroiderer. I use Amaya XT modules for embroidery (with
>licensed Amaya SE Operative System) and Wilcom 9 for digitize (the
>same, licensed, high cost BTW).
>I'm having problems with a digitizing. It's a rectangle (tatami fill,
>0º, first underlay tatami 45º, second underlay tatami 135º) using
>simple stabilizer (peyon brand, the most extended in Mexico). I tried
>to hoop with and without stabilizer, same results.
>The embroidery comes with letters on the rectangle (satin fill, 80%
>density, no underlays), and the rectangle becomes pulled from the
>right-bottom corner. All the rest of design is OK when embroidered.
>And, the fabric is piquè (open weave), so I'm using 5 layers of
>stabilizer to get the best results.
>I hope you can help me.
>ItalCarrier
Help ! ??
You are on the wrong ship, compadre.
show/hide quoted text
That one -------------------->ABCP
is where you should be walking the plank !
Drag your skanky wannabe carcass over there.
/cackle
-----------------------------
0ld Usenet Jungle Saying
-----------------------------
What goes around comes around.
================================
Read and weep..heh !
X-Sender: italcarrier AT gmail.com
X-Apparently-To: embroiderydonkers@yahoogroups.com
Message-ID:
Date: Wed, 25 Apr 2007 23:33:11 -0500
Subject: Re: [embroiderydonkers] wilcom 2006
show/hide quoted text
<quote>
>On 4/25/07, Joe Brown <beardancing72 AT yahoo.com> wrote:
>Can anyone tell me which server the Wilcom 2006 is on.
There are no servers right now
show/hide quoted text
</quote>
================================
.. welcome to Usenet
/swish
lé.ÞeemÞ
|
|
Posted by italcarrier on August 17, 2007, 5:53 pm
show/hide quoted text
> >Hello groupies!
> >I'm ItalCarrier (a nickname) and I'm from Mexico City, I'm a novel
> >digitizer and embroiderer. I use Amaya XT modules for embroidery (with
> >licensed Amaya SE Operative System) and Wilcom 9 for digitize (the
> >same, licensed, high cost BTW).
> >I'm having problems with a digitizing. It's a rectangle (tatami fill,
> >0=BA, first underlay tatami 45=BA, second underlay tatami 135=BA) using
> >simple stabilizer (peyon brand, the most extended in Mexico). I tried
> >to hoop with and without stabilizer, same results.
> >The embroidery comes with letters on the rectangle (satin fill, 80%
> >density, no underlays), and the rectangle becomes pulled from the
> >right-bottom corner. All the rest of design is OK when embroidered.
> >And, the fabric is piqu=E8 (open weave), so I'm using 5 layers of
> >stabilizer to get the best results.
> >I hope you can help me.
> >ItalCarrier
> Help ! ??
> You are on the wrong ship, compadre.
> That one -------------------->ABCP
> is where you should be walking the plank !
> Drag your skanky wannabe carcass over there.
> /cackle
> -----------------------------
> 0ld Usenet Jungle Saying
> -----------------------------
> What goes around comes around.
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D
show/hide quoted text
> Read and weep..heh !
> X-Sender: italcarrier AT gmail.com
> X-Apparently-To: embroiderydonk...@yahoogroups.com
> Message-ID:
> Date: Wed, 25 Apr 2007 23:33:11 -0500
> Subject: Re: [embroiderydonkers] wilcom 2006
> <quote>>On 4/25/07, Joe Brown <beardancing72 AT yahoo.com> wrote:
> >Can anyone tell me which server the Wilcom 2006 is on.
> There are no servers right now
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D
show/hide quoted text
> .. welcome to Usenet
> /swish
> l=E9.=DEeem=DE
I didn't understood,
1=2E WTF means ABCP?
2=2E Compadre? Your son/daughter is/are my godson/goddaughter? If not,
you are not my compadre, pal.
Ital
|
|
Posted by lé.ÞeemÞ on August 19, 2007, 4:44 pm
show/hide quoted text
>> >Hello groupies!
>> >I'm ItalCarrier (a nickname) and I'm from Mexico City, I'm a novel
>> >digitizer and embroiderer. I use Amaya XT modules for embroidery (with
>> >licensed Amaya SE Operative System) and Wilcom 9 for digitize (the
>> >same, licensed, high cost BTW).
>> >I'm having problems with a digitizing. It's a rectangle (tatami fill,
>> >0º, first underlay tatami 45º, second underlay tatami 135º) using
>> >simple stabilizer (peyon brand, the most extended in Mexico). I tried
>> >to hoop with and without stabilizer, same results.
>> >The embroidery comes with letters on the rectangle (satin fill, 80%
>> >density, no underlays), and the rectangle becomes pulled from the
>> >right-bottom corner. All the rest of design is OK when embroidered.
>> >And, the fabric is piquè (open weave), so I'm using 5 layers of
>> >stabilizer to get the best results.
>> >I hope you can help me.
>> >ItalCarrier
>> Help ! ??
>> You are on the wrong ship, compadre.
>> That one -------------------->ABCP
>> is where you should be walking the plank !
>> Drag your skanky wannabe carcass over there.
>> /cackle
>> -----------------------------
>> 0ld Usenet Jungle Saying
>> -----------------------------
>> What goes around comes around.
>> ================================
>> Read and weep..heh !
>> X-Sender: italcarrier AT gmail.com
>> X-Apparently-To: embroiderydonk...@yahoogroups.com
>> Message-ID:
>> Date: Wed, 25 Apr 2007 23:33:11 -0500
>> Subject: Re: [embroiderydonkers] wilcom 2006
>> <quote>>On 4/25/07, Joe Brown <beardancing72 AT yahoo.com> wrote:
>> >Can anyone tell me which server the Wilcom 2006 is on.
>> There are no servers right now
>> ================================
>> .. welcome to Usenet
>> /swish
>> lé.ÞeemÞ
>I didn't understood,
Understood. And understood before you responded.
show/hide quoted text
>1. WTF means ABCP?
>2. Compadre? Your son/daughter is/are my godson/goddaughter? If not,
>you are not my compadre, pal.
Correct. I am no Donker, pal <bfg>
show/hide quoted text
..welcome to Usenet:->
/swish
lé.ÞeemÞ
|
|
Posted by John Bengi on August 19, 2007, 6:59 pm
hola amigo!
It is best not to answer this nasty troll (puta). He/she uses mucho
nombres to entice the victims into responding to their requests.
Currently in use:
rH//phlctErse//Digi//AuqtyJack//A{nty//.Hfress//Pixie//Lectron_Nuis//M
II//Venlig Hilsen//You//wmbjk//William P.N. Smith//Aunt}K//9 foot 3//5
foot 2//5feet-24inches//You//Digi//
show/hide quoted text
//<.>" <<.>@mine.net//Me//ferret//lé.ÞeemÞ//®Hæress//�H�ss
//PurriePrPr//colin//.Hfress//frug//Taz//Tazoar//T@z//dob.a.TROLL//P.BENGI//Digi//JohnTuttle//.Haress//GimmieButt//John
Latelee//Eunty JEck//Aunty Jack//Bunty Jack//Thunnus Albacarus//Gimmie
Bob//Pizza Girl//Mrs
Marples//anonymous//helga//wingnut//Nemisis.0.GimmeButt//JimmyB0ND//Paul
Vader//windows.embroidery.Gymmy//John P
Bungle//Shyl0rk//Shyl0rk//Hatunen//Lectr0Nuis//LectroQuis//slew_m//BugHunter//fant0m//KazAdz//Gabriel//tictactoe//guesswho//f00//nope//stuphn.Tulip.Bulbs.up.de.Dyke.Diver//windows.embroidery.Gymmy//Judge_Dread//de.troll.is//snuph.m//
...AND a miriad of other munged versions of the above//
show/hide quoted text
> >Hello groupies!
> >I'm ItalCarrier (a nickname) and I'm from Mexico City, I'm a novel
> >digitizer and embroiderer. I use Amaya XT modules for embroidery
> >(with
> >licensed Amaya SE Operative System) and Wilcom 9 for digitize (the
> >same, licensed, high cost BTW).
> >I'm having problems with a digitizing. It's a rectangle (tatami
> >fill,
> >0º, first underlay tatami 45º, second underlay tatami 135º) using
> >simple stabilizer (peyon brand, the most extended in Mexico). I
> >tried
> >to hoop with and without stabilizer, same results.
> >The embroidery comes with letters on the rectangle (satin fill, 80%
> >density, no underlays), and the rectangle becomes pulled from the
> >right-bottom corner. All the rest of design is OK when embroidered.
> >And, the fabric is piquè (open weave), so I'm using 5 layers of
> >stabilizer to get the best results.
> >I hope you can help me.
> >ItalCarrier
> Help ! ??
> You are on the wrong ship, compadre.
> That one -------------------->ABCP
> is where you should be walking the plank !
> Drag your skanky wannabe carcass over there.
> /cackle
> -----------------------------
> 0ld Usenet Jungle Saying
> -----------------------------
> What goes around comes around.
> ================================
> Read and weep..heh !
> X-Sender: italcarrier AT gmail.com
> X-Apparently-To: embroiderydonk...@yahoogroups.com
> Message-ID:
> Date: Wed, 25 Apr 2007 23:33:11 -0500
> Subject: Re: [embroiderydonkers] wilcom 2006
> <quote>>On 4/25/07, Joe Brown <beardancing72 AT yahoo.com> wrote:
> >Can anyone tell me which server the Wilcom 2006 is on.
> There are no servers right now
> ================================
> .. welcome to Usenet
> /swish
> lé.ÞeemÞ
I didn't understood,
1. WTF means ABCP?
2. Compadre? Your son/daughter is/are my godson/goddaughter? If not,
you are not my compadre, pal.
Ital
|
Page 1 of 2 1 2 > last >>
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>I'm ItalCarrier (a nickname) and I'm from Mexico City, I'm a novel
>digitizer and embroiderer. I use Amaya XT modules for embroidery (with
>licensed Amaya SE Operative System) and Wilcom 9 for digitize (the
>same, licensed, high cost BTW).
>I'm having problems with a digitizing. It's a rectangle (tatami fill,
>0º, first underlay tatami 45º, second underlay tatami 135º) using
>simple stabilizer (peyon brand, the most extended in Mexico). I tried
>to hoop with and without stabilizer, same results.
>The embroidery comes with letters on the rectangle (satin fill, 80%
>density, no underlays), and the rectangle becomes pulled from the
>right-bottom corner. All the rest of design is OK when embroidered.
>And, the fabric is piquè (open weave), so I'm using 5 layers of
>stabilizer to get the best results.
>I hope you can help me.
>ItalCarrier