If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by Wes on August 11, 2007, 4:54 pm
Hello,
My wife just bought a Janome MC11000 sewing machine. She is trying to send
an embroidery pattern from her computer to the sewing machine.
Is there someone who can help us with this?
We have tried to send the information using the USB CABLE and we keep
getting a Parameter Error message.
I am going to see if I can save it to Thumb Drive and/or Compact Flash card
for the sewing to us.
However, we would like to be able to send the designs DIRECTLY from PC to
Machine.
Thanks ahead of time,
Ron
|
|
Posted by Herb on August 11, 2007, 6:07 pm
Wes wrote:
show/hide quoted text
> Hello,
>
> My wife just bought a Janome MC11000 sewing machine. She is trying to send
> an embroidery pattern from her computer to the sewing machine.
>
> Is there someone who can help us with this?
>
> We have tried to send the information using the USB CABLE and we keep
> getting a Parameter Error message.
>
> I am going to see if I can save it to Thumb Drive and/or Compact Flash card
> for the sewing to us.
>
> However, we would like to be able to send the designs DIRECTLY from PC to
> Machine.
>
> Thanks ahead of time,
>
> Ron
>
>
The Janome is supposed to support five different ways to get a design
to the sewing machine, including Direct PC Link. Have you looked for
the info in the manual? Is there an installation CD provided with the
11000 that you have to install on your PC?
From the advertising:
Direct PC Connection, ATA PC Card, Optional CD-ROM Drive, and a
standard USB Memory Stick. And if you really want to go high tech, the
wireless optional StitchLink allows you to transfer designs from your
computer to your Memory Craft 11000 at the other end of the house.
- Herb
|
|
Posted by Wes on August 11, 2007, 11:20 pm
Thank you for helping Herb,
I was able to get a design to transfer onto the Compact Flash card and then
to the sewing machine. I am still not able to get the Direct PC Link to work
though.
The lady who teaches this machine at the store is available on Wednesday so
we can call her then.
I have not given up yet. Since it says there is a Parameter Error I would
think it has something to do with the properties between the computer and
the sewing machine.
I haven't given up yet.
show/hide quoted text
> Wes wrote:
>> Hello,
>> My wife just bought a Janome MC11000 sewing machine. She is trying to
>> send an embroidery pattern from her computer to the sewing machine.
>> Is there someone who can help us with this?
>> We have tried to send the information using the USB CABLE and we keep
>> getting a Parameter Error message.
>> I am going to see if I can save it to Thumb Drive and/or Compact Flash
>> card for the sewing to us.
>> However, we would like to be able to send the designs DIRECTLY from PC to
>> Machine.
>> Thanks ahead of time,
>> Ron
> The Janome is supposed to support five different ways to get a design to
> the sewing machine, including Direct PC Link. Have you looked for the
> info in the manual? Is there an installation CD provided with the 11000
> that you have to install on your PC?
> From the advertising:
> Direct PC Connection, ATA PC Card, Optional CD-ROM Drive, and a standard
> USB Memory Stick. And if you really want to go high tech, the wireless
> optional StitchLink allows you to transfer designs from your computer to
> your Memory Craft 11000 at the other end of the house.
> - Herb
|
|
Posted by Limara on August 12, 2007, 6:42 pm
are you trying to send it to the machine via the customizer software?
I seem to remember the software contained different versions for other
models of machine as well make sure you have installed it for the
11000 machine,
wrote:
show/hide quoted text
>Hello,
>My wife just bought a Janome MC11000 sewing machine. She is trying to send
>an embroidery pattern from her computer to the sewing machine.
>Is there someone who can help us with this?
>We have tried to send the information using the USB CABLE and we keep
>getting a Parameter Error message.
>I am going to see if I can save it to Thumb Drive and/or Compact Flash card
>for the sewing to us.
>However, we would like to be able to send the designs DIRECTLY from PC to
>Machine.
>Thanks ahead of time,
>Ron
|
|
Posted by Wes on August 12, 2007, 9:19 pm
Latest update...
I was able to get the patterns to transfer to the sewing machine using the
USB cable. Turns out you have to select the destination before you can
transfer the pattern.
However, when we bring up a pattern and try to save it from the cdrom disk
to the hard drive we still get an error message. Not sure what is causing
this problem. This means we are not able to resize or modify the pattern at
this time.
My wife will be taking a class to learn how to use the new machine and this
will be one of MANY questions to ask.
Janome is VERY GOOD about telling how to update the firmware in the sewing
machine and provided detail instructions to follow.
I will keep you updated.
show/hide quoted text
> are you trying to send it to the machine via the customizer software?
> I seem to remember the software contained different versions for other
> models of machine as well make sure you have installed it for the
> 11000 machine,
> wrote:
>>Hello,
>>My wife just bought a Janome MC11000 sewing machine. She is trying to send
>>an embroidery pattern from her computer to the sewing machine.
>>Is there someone who can help us with this?
>>We have tried to send the information using the USB CABLE and we keep
>>getting a Parameter Error message.
>>I am going to see if I can save it to Thumb Drive and/or Compact Flash
>>card
>>for the sewing to us.
>>However, we would like to be able to send the designs DIRECTLY from PC to
>>Machine.
>>Thanks ahead of time,
>>Ron
>
|
| Similar Threads | Posted | | problem with singer psw 1.1 software | August 12, 2007, 11:03 pm |
| Thread nest problem. | September 24, 2007, 2:37 pm |
| babylock ellure problem... | March 2, 2008, 5:46 pm |
| Problem Importing From Card | May 6, 2006, 1:35 pm |
| problem with disc handbags | May 9, 2008, 12:32 pm |
| Bernina Artista 200E problem | February 1, 2007, 9:07 am |
| Problem Installing & Running Bernina Plus 4 on my NEW PC with XP S2-Can anyone help me please? Thanks! | April 22, 2006, 1:56 pm |
| Re: Well, I am sure you have all heard that I had a small legal problem today, | October 12, 2006, 8:52 pm |
| Janome 9700 | November 28, 2006, 5:28 pm |
| Janome owners | February 8, 2007, 12:50 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>
> My wife just bought a Janome MC11000 sewing machine. She is trying to send
> an embroidery pattern from her computer to the sewing machine.
>
> Is there someone who can help us with this?
>
> We have tried to send the information using the USB CABLE and we keep
> getting a Parameter Error message.
>
> I am going to see if I can save it to Thumb Drive and/or Compact Flash card
> for the sewing to us.
>
> However, we would like to be able to send the designs DIRECTLY from PC to
> Machine.
>
> Thanks ahead of time,
>
> Ron
>
>