Thread nest problem.

Posted by TJ ODonnell on September 24, 2007, 2:37 pm

Hi everyone-
I m using a Bernette 340 Deco(now made by 'jancome' thats the name on
the plate on the inside of the machine spelt?)

Just today I have been getting these huge thread nests that clog the
process and I cant figure out what I should be looking for.

I changed the needle three times, changes the bobbin twoce, adjusted the
tension up and down and it just seems to get worse.

should I bring it in to get serviced? its only 8 months old.

TJ

--
Posted via NewsDemon.com - Premium Uncensored Newsgroup Service
show/hide quoted text

Posted by 5 foot 2 on September 24, 2007, 4:47 pm

show/hide quoted text

You didn't say if you re-threaded the top thread. Usually this sort of problem
is from threading
the top thread with the presser foot DOWN. Try re-threading it with the presser
foot UP.

5 foot 2

Posted by TJ ODonnell on September 24, 2007, 7:43 pm

THANKS SO MUCH! it worked!
I cant believe something as simple as HOW i was threading it made all
the difference!

Got a whole lot to learn!
thank you thank you!

TJ

show/hide quoted text

--
Posted via NewsDemon.com - Premium Uncensored Newsgroup Service
show/hide quoted text
Unlimited Access, Anonymous Accounts, Uncensored Broadband Access

Similar Threads	Posted
Janome MC11000 Problem	August 11, 2007, 4:54 pm
problem with singer psw 1.1 software	August 12, 2007, 11:03 pm
babylock ellure problem...	March 2, 2008, 5:46 pm
Problem Importing From Card	May 6, 2006, 1:35 pm
problem with disc handbags	May 9, 2008, 12:32 pm
Thread	November 26, 2006, 10:53 pm
Bernina Artista 200E problem	February 1, 2007, 9:07 am
Problem Installing & Running Bernina Plus 4 on my NEW PC with XP S2-Can anyone help me please? Thanks!	April 22, 2006, 1:56 pm
Embroidery Thread	June 8, 2008, 11:12 am
thread tension	June 8, 2008, 9:18 pm