Creases in Sheet Hems Dilemma

Sewing Discussions - A group that is not as it seams. 

Page 3 of 7       < 1 2 3 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Creases in Sheet Hems Dilemma Phaedrine Stonebridge 04-25-2008
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Phaedrine Stonebridge on April 29, 2008, 1:51 am

> Take the freshly laundered sheets that have creases, and rewash in warm
> water allowing them to soak for abit. Rinse in cold water and spin for a
> short time, then allow to drip dry. When damp start pulling and
> smoothing out the hems until they are straight. I would iron them or use
> some sort of press to smooth them furhter and help reset the fabric
> "memory". Stay away from using straight vinegar on cotton and linen, as
> both are weakened by acids.

I will definitely give that a try. I've done that... sort of... with a
spray bottle. But maybe it would work better if the hems were really
soaked before pulling and smoothing. One set is far worse than the
other so that might only work for the other set. I wonder if the high
thread count contributes to the problem.

> It is also possible that the heat and tumble drying are causing the hems
> to distort, and heat will also "set" these creases. Find all but sateen
> sheets are dried best outside of dryer. Indeed only really dry sateen
> sheets in the dryer when circumstances prohibit line drying outdoors, or
> in the airing cupboard.

Indeed. Like I said in another post, I'll never willingly go back to
using a dryer. All my laundry, especially the linens, are just so much
nicer being line-dried. I never would have believed it could make such
a difference.

> > It's interesting that you mention old sheets though. This has not
> > happened with *any* of my vintage sheets (still in use), either
> > percale or muslin, despite the exact same treatment. These
> > particular sheets are 350 thread count pima cotton from The Company
> > Store. I wonder if newer factory fabric treatments are causing
> > this problem.

> Am thinking again, there is something in how the hems were constructed,
> perhaps the tension was a bit tight and one is getting lots of
> constriction. Find so many variations in new linens these days, that am
> grateful one mainly uses vintage Pequot,Wamsutta, Cannon for cotton
> linens, and pure Irish or French linens for pure bed linen. Don't care
> whose name is on the label, most everything is made in China these
> days, and quality varies from good to down right horrible.

I agree. These all-cotton sheets were made in Portugal, however.
Nowadays, I ask where things are made, in an attempt to avoid China and
getting poisoned with God knows what. Even then, it is still hard to
know for sure.

Phae
--
"The tree of Liberty must be refreshed from time to time
with the blood of patriots and tyrants."
-- Thomas Jefferson

Posted by enigma on April 28, 2008, 10:16 pm
:

> It's interesting that you mention old sheets though. This
> has not happened with *any* of my vintage sheets (still in
> use), either percale or muslin, despite the exact same
> treatment. These particular sheets are 350 thread count
> pima cotton from The Company Store. I wonder if newer
> factory fabric treatments are causing this problem.

i've had similar issues with sheets that weren't hemmed on
the straight grain.
lee
--
Last night while sitting in my chair
I pinged a host that wasn't there
It wasn't there again today
The host resolved to NSA.

Posted by Phaedrine Stonebridge on April 29, 2008, 1:08 am

>
> > It's interesting that you mention old sheets though. This
> > has not happened with *any* of my vintage sheets (still in
> > use), either percale or muslin, despite the exact same
> > treatment. These particular sheets are 350 thread count
> > pima cotton from The Company Store. I wonder if newer
> > factory fabric treatments are causing this problem.
>
> i've had similar issues with sheets that weren't hemmed on
> the straight grain.

Amazing. I ran to check as soon as I saw your post. The hems on my
sheets are on grain. But it's just awful how badly some things are made
these days, though, even when you pay a lot of money. The last time I
purchased sheets at a department store (2 different brands), the
stitching had huge holes and was very widely spaced. The fabric turned
out to be not so good either on one set. They were always uncomfortable
and rough. So I've been getting mine at the Company Store ever since.

Phae
--
"The tree of Liberty must be refreshed from time to time
with the blood of patriots and tyrants."
-- Thomas Jefferson

Posted by Candide on April 29, 2008, 1:43 am




>
> >
> > > It's interesting that you mention old sheets though. This
> > > has not happened with *any* of my vintage sheets (still in
> > > use), either percale or muslin, despite the exact same
> > > treatment. These particular sheets are 350 thread count
> > > pima cotton from The Company Store. I wonder if newer
> > > factory fabric treatments are causing this problem.
> >
> > i've had similar issues with sheets that weren't hemmed on
> > the straight grain.
>
> Amazing. I ran to check as soon as I saw your post. The hems on my
> sheets are on grain. But it's just awful how badly some things are
made
> these days, though, even when you pay a lot of money. The last time I
> purchased sheets at a department store (2 different brands), the
> stitching had huge holes and was very widely spaced. The fabric
turned
> out to be not so good either on one set. They were always
uncomfortable
> and rough. So I've been getting mine at the Company Store ever since.
>
> Phae
>
Have said it before, and shall go on saying it, vintage is the best way
to go. Way I see things have enough Pequot and Wamsutta to last the
duration. Not to mention a 70 some odd bolt of Pequot muslin fabric (not
sure of the width, know it is sheeting) just waiting to be run up into
sheets. Does anyone remember when one could purchase sheeting by the
yard and run up one's own? Pillow slips came in tubular lengths as well.

Candide



Posted by Olwyn Mary on April 29, 2008, 8:10 am
Candide wrote:

Does anyone remember when one could purchase sheeting by the
> yard and run up one's own? Pillow slips came in tubular lengths as well.
>
> Candide

You still can. Go to your local quilt shop and buy muslin by the yard.
It comes in various widths up to 108" and several different qualities.
(You gets what you pays for). It does shrink quite a bit, you have to
buy extra to allow for that.

Olwyn Mary in New Orleans.
** Posted from http://www.teranews.com **

Page 3 of 7       < 1 2 3 > last >>
Similar ThreadsPosted
Sheet and bed sizes November 4, 2007, 12:12 am
how to put trim on round hems April 21, 2006, 9:09 pm
top hems that folds and hang down May 24, 2006, 10:02 am
Permanent creases? July 27, 2005, 9:44 pm
questions about wrinkles & creases January 26, 2006, 7:53 pm
cheap sewing machine that sews hems? June 26, 2006, 7:46 pm
Part-time sheet-making work, Sydney Australia December 20, 2005, 2:18 am
The Hanger Dilemma June 4, 2006, 12:52 am
Holiday Dilemma December 15, 2007, 2:01 pm
Ironing Board & Pad Dilemma May 15, 2006, 9:16 pm

Contact Us | Privacy Policy
Sewgirls.com XML SitemapXML Sitemap