Looking for Needles
.: Groups .:. Search .:. About :.
User Password
Register Now! Lost Password?

Sewing Discussions - A group that is not as it seams. 

Page 1 of 2       1 2 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Looking for Needles Ritze 11-04-2005
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Ritze on November 4, 2005, 11:14 pm
Does anybody know where I can buy Class 24 (24x1)needles for my Singer 240W2
industrial machine?

Any website with information on cross references for various needle classes?

Thanks!






Posted by HC on November 5, 2005, 12:15 am
G'day Ritze

Have you looked on eBay? <www.ebay.com>

I bought some needles on eBay having been told they were for a domestic
machine but soon found out they were for an industrial. I'll get them
out and check the number, I do remember they have a round shank, rather
than one flat side as is normal on domestic machines.

Good luck!
Bronwyn ;-)

Ritze wrote:
> Does anybody know where I can buy Class 24 (24x1)needles for my Singer 240W2
> industrial machine?
>
> Any website with information on cross references for various needle classes?
>
> Thanks!
>
>
>
>
>

Posted by G. Wayne Hines on November 5, 2005, 5:31 am

>Does anybody know where I can buy Class 24 (24x1)needles for my Singer 240W2
>industrial machine?

You don't say where you are, but if you are in Canada or the US, check
your friendly, neighbourhood local sewing machine shop. Here in the
Great White North there is at least one company that provides dealers
with sewing machine parts for most domestic makes and some
industrials, and they also supply industrial needles. I'd be very
surprised if there's not at least one similar company in the U-S.

gwh


Posted by HC on November 5, 2005, 6:03 am
G'day GWH

Are you familiar with Janome 9500/9700 machines? I'm wanting to fit a
side door from a 9700 to a 9500 and wanting to know if it will fit? The
9500 side ?door doesn't open and is a PITA.....;-))

Apologies to the OP, just one question for GWH.

Thanks
Bronwyn ;-)

G. Wayne Hines wrote:

>
>
>>Does anybody know where I can buy Class 24 (24x1)needles for my Singer 240W2
>>industrial machine?
>
>
> You don't say where you are, but if you are in Canada or the US, check
> your friendly, neighbourhood local sewing machine shop. Here in the
> Great White North there is at least one company that provides dealers
> with sewing machine parts for most domestic makes and some
> industrials, and they also supply industrial needles. I'd be very
> surprised if there's not at least one similar company in the U-S.
>
> gwh
>

Posted by G. Wayne Hines on November 5, 2005, 12:03 pm

>G'day GWH
>
>Are you familiar with Janome 9500/9700 machines? I'm wanting to fit a
>side door from a 9700 to a 9500 and wanting to know if it will fit? The
>9500 side ?door doesn't open and is a PITA.....;-))

I played on a 9700 in New Orleans in August, but I couldn't tell you
if the door opens or not. :-)

You'd pretty well have to see the two machines side-by-side, or be
intimately familiar with both, to tell if the door from a 9700 would
fit and could be bolted to a 9500.

gwh


Page 1 of 2       1 2 > last >>
Similar ThreadsPosted
ELx705 CF needles? August 21, 2006, 12:52 am
Which machine needles? August 27, 2007, 3:29 pm
ELx705 needles.....where to buy? October 6, 2007, 8:06 am
source for Merrow Needles August 30, 2008, 2:17 pm
Needles For Outdoor Fabrics September 11, 2008, 3:28 pm
Why do I get skipped stitches with ballpoint needles? March 7, 2006, 2:47 pm
Source for Schmetz Needles On-Line June 18, 2008, 10:55 am
"kenmore" needles for 1970 sears kenmore September 10, 2008, 10:57 pm

Contact Us | Privacy Policy
Sewgirls.com XML SitemapXML Sitemap