Polyester crinkle cloth

Sewing Discussions - A group that is not as it seams. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Polyester crinkle cloth cactus8sew-er 06-13-2008
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by cactus8sew-er on June 13, 2008, 3:43 pm
How to hem? I took in the project from a neighbor. She wants a
polyester crinkle cloth (sort of like gauze) hemmed up about 3.25". At
first, I thought I would hem it by hand and "press" it by hand as I
went. But now, I think I should cut off about 2.5" of it, then turn it
up .25", and then another .5". Any comments of past experiences, or
suggestions are welcome! THANKS!

Posted by cactus8sew-er on June 13, 2008, 3:44 pm
> How to hem? I took in the project from a neighbor. She wants a
> polyester crinkle cloth (sort of like gauze) hemmed up about 3.25". At
> first, I thought I would hem it by hand and "press" it by hand as I
> went. But now, I think I should cut off about 2.5" of it, then turn it
> up .25", and then another .5". Any comments of past experiences, or
> suggestions are welcome! THANKS!

Forgot to say, it's a dress!

Posted by BEI Design on June 13, 2008, 4:43 pm
cactus8sew-er wrote:
> How to hem? I took in the project from a neighbor. She
> wants a polyester crinkle cloth (sort of like gauze)
> hemmed up about 3.25". At first, I thought I would hem it
> by hand and "press" it by hand as I went. But now, I
> think I should cut off about 2.5" of it, then turn it up
> .25", and then another .5". Any comments of past
> experiences, or suggestions are welcome! THANKS!

I narrow 1/4" to 3/8" twice-turned hem should work. Hemming
by hand should give a good result, although machine hem is
probably Ok, too. Cut off the excess and test both ways?
If this is a "broom-stick" type of skirt, you should be able
to produce the wrinkled finish by dampening the finished hem
and crumpling it up (accordion pleat it and squash tightly),
then securing until dry with rubber bands.

There is an interesting technique at the bottom of this page
for maintaining the crinkles:
http://www.ericas.com/projects/proj9801.htm

In my experience though, "crinkle" cloth is usually 100%
cotton.

Beverly



Posted by cactus8sew-er on June 21, 2008, 2:36 pm
wrote:
> cactus8sew-er wrote:
> > How to hem? I took in the project from a neighbor. She
> > wants a polyester crinkle cloth (sort of like gauze)
> > hemmed up about 3.25". At first, I thought I would hem it
> > by hand and "press" it by hand as I went. But now, I
> > think I should cut off about 2.5" of it, then turn it up
> > .25", and then another .5". Any comments of past
> > experiences, or suggestions are welcome! THANKS!
>
> I narrow 1/4" to 3/8" twice-turned hem should work. =A0Hemming
> by hand should give a good result, although machine hem is
> probably Ok, too. =A0Cut off the excess and test both ways?
> If this is a "broom-stick" type of skirt, you should be able
> to produce the wrinkled finish by dampening the finished hem
> and crumpling it up (accordion pleat it and squash tightly),
> then securing until dry with rubber bands.
>
> There is an interesting technique at the bottom of this page
> for maintaining the crinkles:http://www.ericas.com/projects/proj9801.htm
>
> In my experience though, "crinkle" cloth is usually 100%
> cotton.
>
> Beverly

Result: Here's what I did: I measured 3.5" from my sewing needle (the
amount I actually needed to cut off) and put a piece of masking tape
on my machine. I then sewed a line of "stay-stitching" in a shallow
zigzag stitch along that line. I then trimmed the unneeded fabric from
the dress, cutting along my stitched line. I then turned that up 1/4"
and then turned that line up another 3/8 to 1/2 inch. Only problem:
matching the front hems as this dress buttoned down the front. UGH!
Good thing patience is a virtue, as I carefully removed stitching back
up to a point where I could ease the hem up to match both fronts.
(NOTE TO SELF: Next time, match fronts before stitching final hem.)
After messing around with that for two or three tries, I finally was
pleased with the result. I spritzed the hem and scrunched it all
around, and it dried overnight and looked great and my neighbor was
pleased with the result! Hope this saves someone else some time and
trouble!

Posted by cactus8sew-er on June 21, 2008, 2:39 pm
> wrote:
>
>
>
> > cactus8sew-er wrote:
> > > How to hem? I took in the project from a neighbor. She
> > > wants a polyester crinkle cloth (sort of like gauze)
> > > hemmed up about 3.25". At first, I thought I would hem it
> > > by hand and "press" it by hand as I went. But now, I
> > > think I should cut off about 2.5" of it, then turn it up
> > > .25", and then another .5". Any comments of past
> > > experiences, or suggestions are welcome! THANKS!
>
> > I narrow 1/4" to 3/8" twice-turned hem should work. =A0Hemming
> > by hand should give a good result, although machine hem is
> > probably Ok, too. =A0Cut off the excess and test both ways?
> > If this is a "broom-stick" type of skirt, you should be able
> > to produce the wrinkled finish by dampening the finished hem
> > and crumpling it up (accordion pleat it and squash tightly),
> > then securing until dry with rubber bands.
>
> > There is an interesting technique at the bottom of this page
> > for maintaining the crinkles:http://www.ericas.com/projects/proj9801.ht=
m
>
> > In my experience though, "crinkle" cloth is usually 100%
> > cotton.
>
> > Beverly
>
> Result: Here's what I did: I measured 3.5" from my sewing needle (the
> amount I actually needed to cut off) and put a piece of masking tape
> on my machine. I then sewed a line of "stay-stitching" in a shallow
> zigzag stitch along that line. I then trimmed the unneeded fabric from
> the dress, cutting along my stitched line. I then turned that up 1/4"
> and then turned that line up another 3/8 to 1/2 inch. Only problem:
> matching the front hems as this dress buttoned down the front. UGH!
> Good thing patience is a virtue, as I carefully removed stitching back
> up to a point where I could ease the hem up to match both fronts.
> (NOTE TO SELF: Next time, match fronts before stitching final hem.)
> After messing around with that for two or three tries, I finally was
> pleased with the result. I spritzed the hem and scrunched it all
> around, and it dried overnight and looked great and my neighbor was
> pleased with the result! Hope this saves someone else some time and
> trouble!

P.S. This was 100% Rayon crinkle cloth, sort of gauze-like, and once
spritzed, it held its crinkles and dried well, looking like new along
the hemmed edge, and my neighbor was pleased!

Similar ThreadsPosted
sewing with crinkle cotton May 12, 2007, 8:13 am
Singer Featherweight 221 CRINKLE sewing machine July 12, 2007, 3:11 pm
Bamboo cloth? July 10, 2006, 12:29 pm
using curtain Cloth for summer skirts July 17, 2008, 11:42 pm
It is THAT time of Year= Cloth/threads check September 1, 2008, 11:50 pm
Online Desi Tailor-Shalwar Kameez with your Cloth Piece! November 28, 2005, 4:40 pm
Sueded Polyester - napped September 26, 2006, 10:58 pm
sueded polyester - raveliness September 29, 2006, 3:05 pm
Ironing pleats in polyester December 12, 2007, 10:11 pm
OT: how to remove blue pen ink from polyester and nylon fabric ? July 31, 2008, 3:36 pm

Contact Us | Privacy Policy
Sewgirls.com XML SitemapXML Sitemap