Hi guys, im a newbie to this site and my sister gave me a necchi 3205fa and i cant seem to get the bobbin to catch. any suggestions?
------------------------------------- AJ ("`-''-/").___..--''"`-._ `6_ 6 ) `-. ( ).`-.__.`) (_Y_.)' ._ ) `._ `. ``-..-' _..`--'_..-_/ /--'_.' ,' (il).-'' (li).' ((!.-'
Did she give you the manual? If not, be sure you find one, you'll need it for maintenance.
If you have the manual, re-thread both the bobbin and the needle path completely from scratch. Be sure the bobbin is in right-way-round. Once threaded, hold onto the needle thread-tail behind the presser foot while you run the flywheel forward by hand and see if the bobbin thread comes up.
HTH,
Have you got the needle in backwards, by chance? Flat back of the needle goes to the back of the machine in most cases.
Could the needle be damaged? Try a new one.
Is the upper tension set to a normal-ish value around 4, or is it much too high, like 9?
Bobbin threaded correctly?
Are you turning the handwheel in the direction that would cause fabric to advance from the front to the back of the machine?
Most common cause is incorrect insertion of the needle.
Check the manual.
-Irene
Thanks for helping. keep you posted on how it works.
------------------------------------- AJ
InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.