how to correctly insert the bobbin case Brother's VX-807
.: Groups .:. Search .:. About :.
User Password
Register Now! Lost Password?

Sewing Discussions - A group that is not as it seams. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
how to correctly insert the bobbin case Brother's VX-807 miraahn22 08-15-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by on August 15, 2006, 1:14 pm
I wonder if anyone could help me out here. I've been sitting in front
of this machine sweating trying to put the bobbin case together. I
check online with Brothers, but they were not very helpful. I cannot
get this machine to work to do anything now. I tried several times to
put the bobbing case together. Please any kind of advice and steps to
put this together, thanks!


Posted by Kate Dicey on August 15, 2006, 2:04 pm
miraahn22@gmail.com wrote:

> I wonder if anyone could help me out here. I've been sitting in front
> of this machine sweating trying to put the bobbin case together. I
> check online with Brothers, but they were not very helpful. I cannot
> get this machine to work to do anything now. I tried several times to
> put the bobbing case together. Please any kind of advice and steps to
> put this together, thanks!
>
Is this a drop-in or front loading machine?

--
Kate XXXXXX R.C.T.Q Madame Chef des Trolls
Lady Catherine, Wardrobe Mistress of the Chocolate Buttons
http://www.katedicey.co.uk
Click on Kate's Pages and explore!

Posted by BEI Design on August 15, 2006, 2:04 pm

>I wonder if anyone could help me out here. I've been sitting in
>front
> of this machine sweating trying to put the bobbin case
> together. I
> check online with Brothers, but they were not very helpful. I
> cannot
> get this machine to work to do anything now. I tried several
> times to
> put the bobbing case together. Please any kind of advice and
> steps to
> put this together, thanks!

The site below does not list the VX-807, but has the threading
diagram (including the bobbin case, scroll down to the bottom of
the page) for the VX-808:

http://www.sewusa.com/Threading_Diagrams/Threading_Pages/Brother_Sewing_Machine_Threading/brother_vx_808_809_threading_diagram.htm

http://makeashorterlink.com/?Z3E42109D

maybe there's enough similarity that it will help?

Beverly



Posted by Ron Anderson on August 15, 2006, 4:18 pm
I will assume you took apart the entire shuttle assembly.
Raise the needle to the highest position.
Then fist insert the shuttle, the half moon shaped piece with the beak on
it, beak goes down.
It helps if you tip the machine back a little so it does not fall out.
The 2 black levers should be pointing away from the center at about 10 and 2
Put the ring on and move the lever toward the center to clip them on the
race ring.
Place the bobbin in the bobbin case so then you pull the thread the bobbin
turns counter clockwise.
Place the bobbin case on the pin on the shuttle with the finger positioned
so that it fits in the slot in the race ring (just before 12 o'clock)
Be sure it snaps into place. you will hear an audible click


--
Ron Anderson A1 Sewing Machine
PO Box 60, Sand Lake, NY 12153
518-469-5133
http://www.singera1sewing.com
http://www.a1sewingmachine.com
>I wonder if anyone could help me out here. I've been sitting in front
> of this machine sweating trying to put the bobbin case together. I
> check online with Brothers, but they were not very helpful. I cannot
> get this machine to work to do anything now. I tried several times to
> put the bobbing case together. Please any kind of advice and steps to
> put this together, thanks!
>



Posted by Olwyn Mary on August 15, 2006, 8:59 pm
Ron Anderson wrote:
> I will assume you took apart the entire shuttle assembly.
> Raise the needle to the highest position.
> Then fist insert the shuttle, the half moon shaped piece with the beak on
> it, beak goes down.
> It helps if you tip the machine back a little so it does not fall out.
> The 2 black levers should be pointing away from the center at about 10 and 2
> Put the ring on and move the lever toward the center to clip them on the
> race ring.
> Place the bobbin in the bobbin case so then you pull the thread the bobbin
> turns counter clockwise.
> Place the bobbin case on the pin on the shuttle with the finger positioned
> so that it fits in the slot in the race ring (just before 12 o'clock)
> Be sure it snaps into place. you will hear an audible click
>
>
Hey, that sounds EXACTLY like my White machine, circa 1975. Are hey
cousins??

Olwyn Mary in New Orleans.

--
Posted via a free Usenet account from http://www.teranews.com


Similar ThreadsPosted
Singer 201-2 parts? Need bobbin case... September 25, 2005, 11:37 pm
in case you don't see me for a while May 7, 2007, 9:26 pm
Rifle case pattern? February 11, 2006, 10:05 am
Sewing Machine Case December 18, 2006, 5:36 pm
Pillow Case Pattern March 29, 2007, 11:13 pm
A good case for having a serger September 8, 2007, 9:39 pm
hard case for Bernina 1090? January 20, 2007, 12:34 pm
In case your at a lost as to what to wear, check out this URL September 18, 2008, 5:27 pm
Re: The currant FTL project... Update on the fruit & nut case: Progress! March 17, 2008, 1:30 am
RE: threading the bobbin January 11, 2007, 9:04 pm

Contact Us | Privacy Policy
Sewgirls.com XML SitemapXML Sitemap