Adding button holes and buttons to RTW

Sewing Textiles - Sewing: clothes, furnishings, costumes, etc. 

Page 1 of 4       1 2 3 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Adding button holes and buttons to RTW Tricia 09-01-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Tricia on September 1, 2006, 4:59 pm
Hi!

I usually lurk here and frequent the quilting group but I got a
question that fits more into the sewing side of things

I have a top (purchased, ready to wear) that I recently wore to a job
interview. I was just barely this side of comfortable with where the
buttons began and it has been nicely suggested to me that the top would
look more professional and appropriate for work if it buttoned higher.
Being "blessed" in that area, I'm not totally surprised at the
suggestion. I'm sure you have already heard many times over how
finding RTW that fits appropriately for one with my body type is
difficult so I won't go into that. I just want to know how to fix it!

A picture of the top (actually the whole interview outfit) can be seen
at
http://pg.photos.yahoo.com/ph/chirparrooo/detail?.dir=5d57re2&.dnm=5f9dre2.jpg

Is it difficult to add buttons and such to ready to wear tops like
this? What process would you suggest I use to do so (or shouldn't I)?

Oh, and someone else has suggested to me that shoulder pads would help
take up slack created by my sloping shoulders -- I haven't a clue how
to put them in but wondered if pinning them to my undergarment straps
would have the same improvement effect. Any ideas?

TIA,
Tricia


Posted by Betty Vereen Hill on September 1, 2006, 5:19 pm

> Hi!
>
> I usually lurk here and frequent the quilting group but I got a
> question that fits more into the sewing side of things
>
> I have a top (purchased, ready to wear) that I recently wore to a job
> interview. I was just barely this side of comfortable with where the
> buttons began and it has been nicely suggested to me that the top would
> look more professional and appropriate for work if it buttoned higher.
> Being "blessed" in that area, I'm not totally surprised at the
> suggestion. I'm sure you have already heard many times over how
> finding RTW that fits appropriately for one with my body type is
> difficult so I won't go into that. I just want to know how to fix it!
>
> A picture of the top (actually the whole interview outfit) can be seen
> at
> http://pg.photos.yahoo.com/ph/chirparrooo/detail?.dir=5d57re2&.dnm=5f9dre2.jpg
>
> Is it difficult to add buttons and such to ready to wear tops like
> this? What process would you suggest I use to do so (or shouldn't I)?
>
> Oh, and someone else has suggested to me that shoulder pads would help
> take up slack created by my sloping shoulders -- I haven't a clue how
> to put them in but wondered if pinning them to my undergarment straps
> would have the same improvement effect. Any ideas?
>
> TIA,
> Tricia
>

I'm not a sewing guru like so many of the regulars in this group are, but I
do have a "generous" bust. Once I saw the photo of your interview clothing,
I felt compelled to share my opinion with you. There is nothing, absolutely
nothing, about your blouse that even hints that more buttons would be
advisable. The blouse appears to fit you quite well, and since there is no
cleavage showing, I can't imagine why anyone would advise you that the
blouse should be buttoned higher. To conceal what, for heavens sake, maybe
your throat? Aside from the fact that the blouse fits you nicely, it would
be a total waste of effort and expense to attempt to add buttons and
buttonholes to the blouse, as to do so would very likely distort the
appearance and fit of the blouse to the extent that you would no longer wear
it. The old saying, "If it ain't broke, don't fix it", most certainly
applies here.

Betty in Georgia



Posted by Kate Dicey on September 1, 2006, 5:48 pm
Betty Vereen Hill wrote:

>
>>Hi!
>>
>>I usually lurk here and frequent the quilting group but I got a
>>question that fits more into the sewing side of things
>>
>>I have a top (purchased, ready to wear) that I recently wore to a job
>>interview. I was just barely this side of comfortable with where the
>>buttons began and it has been nicely suggested to me that the top would
>>look more professional and appropriate for work if it buttoned higher.
>>Being "blessed" in that area, I'm not totally surprised at the
>>suggestion. I'm sure you have already heard many times over how
>>finding RTW that fits appropriately for one with my body type is
>>difficult so I won't go into that. I just want to know how to fix it!
>>
>>A picture of the top (actually the whole interview outfit) can be seen
>>at
>>http://pg.photos.yahoo.com/ph/chirparrooo/detail?.dir=5d57re2&.dnm=5f9dre2.jpg
>>
>>Is it difficult to add buttons and such to ready to wear tops like
>>this? What process would you suggest I use to do so (or shouldn't I)?
>>
>>Oh, and someone else has suggested to me that shoulder pads would help
>>take up slack created by my sloping shoulders -- I haven't a clue how
>>to put them in but wondered if pinning them to my undergarment straps
>>would have the same improvement effect. Any ideas?
>>
>>TIA,
>>Tricia
>>
>
>
> I'm not a sewing guru like so many of the regulars in this group are, but I
> do have a "generous" bust. Once I saw the photo of your interview clothing,
> I felt compelled to share my opinion with you. There is nothing, absolutely
> nothing, about your blouse that even hints that more buttons would be
> advisable. The blouse appears to fit you quite well, and since there is no
> cleavage showing, I can't imagine why anyone would advise you that the
> blouse should be buttoned higher. To conceal what, for heavens sake, maybe
> your throat? Aside from the fact that the blouse fits you nicely, it would
> be a total waste of effort and expense to attempt to add buttons and
> buttonholes to the blouse, as to do so would very likely distort the
> appearance and fit of the blouse to the extent that you would no longer wear
> it. The old saying, "If it ain't broke, don't fix it", most certainly
> applies here.
>
> Betty in Georgia
>
>
I have to agree with Betty. However, a front on view doesn't reveal
'gaposis' between the buttons - which can happen if there are an
inadequate number of buttons or they are wrongly placed, even if the top
fits well.

Rather than adding buttons, you might like to consider adding an
invisible (as in light weight clear plastic) snap in between any
offending buttons to hold the gap closed. Don't try to close up the
neck any more: you'll just drag the fabric across your upper chest,
distorting the hang of the garment and you'll end up looking like a bag
lady!

Just *who* suggested it needed to be higher at the neck? Were they
trying to protect you from vampires, or just jealous of your great skin
and neat attire?

--
Kate XXXXXX R.C.T.Q Madame Chef des Trolls
Lady Catherine, Wardrobe Mistress of the Chocolate Buttons
http://www.katedicey.co.uk
Click on Kate's Pages and explore!

Posted by Doreen on September 1, 2006, 11:16 pm
Tricia,

I agree with Betty and Kate. The blouse looks very nice on you and the
neckline isn't at all immodest.

As far as shoulder pads, back in my 9 to 5 days I had a pair purchased
in the lingerie department of a nice store...each one had a velcro loop
on the underside, which enclosed your bra and slip straps. They stayed
in place very well and were convenient for any dress or top that needed
shoulder pads but didn't have them attached. Another thing I liked
about them, besides the fact they were rather thin, is that the shoulder
edge was a little cupped, which gave a rounded, natural contour. I
don't know if these are still available, but might be worth looking.

Doreen in Alabama

Posted by BEI Design on September 2, 2006, 3:22 am
Doreen wrote:
>
> As far as shoulder pads, back in my 9 to 5 days I had a
> pair purchased in the lingerie department of a nice
> store...each one had a velcro loop on the underside,
> which enclosed your bra and slip straps. They stayed in
> place very well and were convenient for any dress or top
> that needed shoulder pads but didn't have them attached.
> Another thing I liked about them, besides the fact they
> were rather thin, is that the shoulder edge was a little
> cupped, which gave a rounded, natural contour. I don't
> know if these are still available, but might be worth
> looking.

I have some, too, and I really like them for certain RTW. I
found:

http://www.shoulderpads.com/scart/store/HiFashion_dynamicIndex.asp

http://www.laurensilva.com/Kathleen_Kirkwood_Micro_Edge_Shoulder_Pads_p/kirk-5710x.htm

Beverly



Page 1 of 4       1 2 3 > last >>
Similar ThreadsPosted
Button Holes April 28, 2006, 1:03 am
Adding buttons answer September 1, 2006, 9:12 pm
button covers June 28, 2007, 5:38 pm
Wholesale source for used buttons? December 26, 2006, 12:59 pm
Loops for pearl buttons? December 30, 2006, 5:35 pm
Fabric covered buttons and beltbuckles - how to ? November 13, 2006, 4:53 pm
hi wanna fasinable handnade buttons in horn,bone wood etc for your garment projects May 27, 2007, 7:31 am

Contact Us | Privacy Policy
Sewgirls.com XML SitemapXML Sitemap